* Original reports are written in Japanese.
For further information, Please send us an Inquiry Form specifying the article name.
Theses
Geotechnical and Geological Engineering and Rock mechanics
- Jet and Mix for Partial Solidification (JAMPS) as a Soil Improvement Method (Part I)
- Results of the Field Experiment - - Jet and Mix for Partial Solidification (JAMPS) as a Soil Improvement Method (Part II)
- Centrifuge Model Tests & Dynamic Analyses - - An Experimental Study of Earth Pressure on Very Closely Constructed Parallel Tunnels
- Measurement of Long-Term Settlement of Highly Organic Soil Improved by Preloading
- Prediction System for Geological Conditions Ahead of the Tunnel Face
Materials and Construction Systems
- Application of Self Compacting Concrete to Service Outlet of Dam
- Steel Beams to Reinforced Concrete Column Joints Using Steel Plate Connections (Part 1)
- Pull-Out Test of Plate Connection - - Seismic Retrofitting Method for RC Columns Using Continuous Fiber Sheets
Earthquake and Wind Engineering
- Development of Earthquake Damage Estimation System for City Gas Supply System
- A Simple Method of Estimating the Acceleration Response Spectral Ratio between Basement and Surface Ground
- Regional Earthquake Damage Estimation System Using GIS
- Distribution Characteristics of Mean Wind Speed and Direction Averaged by Scalar and Vector Algorithm
- Wind Effects on Snow Accumulation on Two-Level Flat Roofs
- In Case of Upwind Facing Lower Level Roof - - Reduction of Wind-Induced Response of Rectangular Plan Buildings with Corner Cutting
- Wave Response Analysis for Large-Pier Structures
- Field Observations on Flow and Density Structure in the Kanazawa-Hakkei Area
Structural Engineerring and Aseismic Technology
- Development of RC High Piers Using High-Strength Reinforcing Bars
- Experimental Study on the Shear Strength of Shear Connectors Using Perforated Plates
- Structural Behavior of H-Shaped Core Wall Subjected to Bending and Torsion
- Experimental Study on Details of H-Shaped Beam-to-Box Column Connections
- Connection between Steel Beam and Concrete-Filled Circular Tubular Steel Columns with High-Strength Material
- Connection between High-Strength Concrete-Filled Square Tubular Steel Columns and Steel Beams Reinforced with Internal Diaphragm
- Elasto-Plastic Behavior of the Connection and Subassemblage Frame - - Performance of Grout-Filled Splice Sleeve for High-Grade Rebar SD490 Effect of Structural Factors on Splice Performance
- Discussion of Basemat Flexibility of a BWR-Type Nuclear Reactor Building
- Evaluation of the Influence of Multi-Support Excitation
for the Response of a Cable-Stayed Bridge - Study on Punching Shear Behavior of a Flat Slab Connected to a Shear Wall
- Influence of Frequency Characteristics of Controlling Actuator
on Elasto-Plastic Response Control Using Fuzzy Set Theory - Effects of Center Hole Size and Insert Plate Thickness on Mechanical Properties of Laminated Rubber Bearing
- Damping Characteristics of RC Shear Wall in the Weak Plastic Range
- Dynamic Loading Test of Shear Panel Using Low-Yield-Strength Steel
- Experimental Study on Shear Wall Made of Sprayed Mortar
- Shear Wall Assembled by Separated Precast Concrete Panels
Building Environment Engineering
- Propagation Characteristics of Structure-Borne Sound Caused by Train (Part 3)
- Cut-off Characteristics of Structure-Borne Sound of Floating Railway Track - - Lifetime Estimation for Building Equipment (Part 1)
- Intermittent-Driven Fan Belt - - Evaluation Method for Impression of Visual Spaces with Different Simulation-Tools
- Diagnostic Systems for Ventilation in Tunnels
Urban Planning and Disaster Prevention Engineering
- Comparison of Environmental Impact Assessment Systems in the U.S.A., E.U., and Japan
- Numerical Simulation of Outside Environment over a Large Area
Environment Conservation
- A Designing Method for In-situ Bioremediation of Groundwater
with Advection-Dispersion Analysis - Development of Soil Environment Control System for Maintaining Sports Turf
- Development of Environmentally Friendly Technology for the Production of Hydrogen (Part 2)
- A New Theoretical Approach for Photosynthetic Production of Hydrogen - - Shochu Wastewater Treatment Using Thermophilic Methane Fermentation
- Field Demonstration Test of Shochu Wastewater Treatment by Thermophilic Methane Fermentation -
Reports
Geotechnical and Geological Engineering and Rock mechanics
- Behavior of Soft Ground after Excavation Using the EPS Method
- Performance of Reinforced Basket for Geotechnical Centrifuge
- Behavior of Earth Retaining Structures and Simulation Analysis of Excavation in Soft Ground
Materials and Construction Systems
- Application of Self-Compacting Concrete
- Development of Underwater Cutting Methods for
Steel Materials Using Abrasive-jets - ALC Curtain Wall Finished with Ceramic Plates
- Dismantling Test of Reinforced Concrete Thick Wall with Wire Sawing Method and Controlled Blasting Method
Wind Engineering
- Full-Scale Measurements on Wind-Induced Response Characteristics
of a Semi-Rigid Hanging Roof
Building Environment Engineering
- Propagation Characteristics of Structure-Borne Sound Caused by Trains (Part 4)
- Measurement Results of Structure-Borne Sound at JR Kyushu Kokura Station - - Thermal and Humidity Control of the Nagano Olympic Ice Speed Rink
Mechatronics Engineering
- Automatic Recognition System for Workers around
