* Original reports are written in Japanese.
For further information, Please send us an Inquiry Form specifying the article name.
Theses
Geotechnical and Geological Engineering and Rock Mechanics
- Fluctuation Monitoring System for Fill Material Gradation Using Digital Image Analysis
- Soil Improvement Methods for Existing Structures for Seismic Ground Reinforcement and Liquefaction Countermeasures
- Study of Decontamination Methods in a Decontamination Project in Model Areas in the Restricted Area and the Deliberate Evacuation Area around the Fukushima Daiichi NPP
- Optimization of Remediation Works for Oil-Contaminated Soil Using the Biopile System: Characteristics of Microbial Degradation Rate
- Integrated Prediction System for Geological Conditions ahead of Tunnel Faces
- Rapid and Safe Investigation of Rock Mass Properties of Tunnel Face Using Striking Ball Test
Structural Engineering and Aseismic Technology
- Improvement of the Method of Evaluating Tsunami Wave Pressure Acting on Land Structures
- Estimation of Changes in Ground Response Characteristics at K-NET and KiK-net Sites During the 2011 off the Pacific Coast of Tohoku Earthquake
- Method of Evaluating the Shear Capacity of Perfobond Rib Shear Connectors
- Shear Failure Mechanism of RC Beams Using Ultra-High-Strength Fiber-Reinforced Concrete (SUQCEM) Precast Formworks
- Structural Performance of Steel and CFT Columns Subjected to Long-Period Earthquake Ground Motions: Multicycle Loading Characteristics Under the Condition of Small Plastic Amplitude and High Axial Force Ratio
- Collapse Behavior of and Antiseismic Measures for Conventional Suspended Ceiling Systems with Steel Members
- Improvement of 3D FEM for RC Beam-Column Joints Using Blind Analyses
Materials and Construction Systems
- Durability of Concrete Exposed to a Marine Environment for 20 Years
- Influence of Air Content of Moderate-Heat Portland Cement Concrete with Fly Ash on Frost Damage Resistance
- Surface Repair Method for Small Earth Dam Embankments Using ECCs
- Basic Characteristics of Long-Distance-Pumpable Air Mortar for Tunnel Filling
- Application Examples and Evaluation of Pumpability on High Strength Filling Concrete for CFT (Concrete Filled Steel Tube) Structures
Building Environment Engineering
- Large-Eddy Simulation of Indoor Dispersion of Expiratory Aerosol in Various Diffuser-induced Airflow Patterns
- Ductless Air-Conditioning System Using the Coanda Effect: Measurement Results for Basic Performance in Summer and Indoor Thermal Environment in Winter
Environmental Engineering
- Creation of Quercus Serrata Forest in Immature Soil on Developed Land: Survival and Growth of Seedlings of Eight Species and Change in Chemical Characteristics of Planting Ground Soil
- Effect of Decontamination on Classification of Soil Contaminated with Radioactive Materials
Sustainable Construction Systems
- Treatment of Distillation Wastewater Discharged from a Cellulosic Bioethanol Production Process
Earthquake and Wind Engineering
- Verification of Tsunami Inundation Simulation Based on Comparison with Hydraulic Model Experiment
- Effect on Wind Environment Assessment of Change of Wind Observation Location and Height at TMO
- Proposal for Wind Environment Assessment Criteria Using the Beaufort Scale
Mechatronics Engineering
- Measurement of Strain in Asphalt Structures Using Embedded Fiber-Optic Sensors
- Improvement of Permeability in the Near-Well Region by Ultrasonic Vibration
Reports
Geotechnical and Geological Engineering and Rock Mechanics
- Structural Performance of Semi-Rigid Pile Head Connection Methods: the Capring Pile Construction Method and the Capten Pile Construction Method
Materials and Construction Systems
- Application of 3D CAD to Generate Construction Drawings and in Construction Management
- Development of Environmentally Friendly Concrete for CFT Structures