* Original reports are written in Japanese.
For further information, Please send us an Inquiry Form specifying the article name.
Theses
Geotechnical and Geological Engineering and Rock Mechanics
- Hexavalent Chromium: A Decade of Developments and Countermeasures
- Shortening of Work Period and Development of Predictive Technology for Artificial Ground Freezing
- In Situ Remediation Technique for Cyanide-Contaminated Groundwater Using a Combination of a Groundwater Recharge and Discharge System and Chemical Oxidation Methods Using a Plastic-Board Drain
- Pilot-Scale Test of a KAT Beads Adsorption Mat Using Actual Rock that Naturally Contains Arsenic
- Analytical Study of Piles that Penetrate Existing Underground Structures
Structural Engineering and Aseismic Technology
- Verification of Damage Evaluation Method based on Measurement of Relative Story Displacements through E-Defense Test
- Accuracy of the Overturning Moment of a Square Tall Building Predicted Using Large Eddy Simulation(LES)
- Development of a Lightweight High-Durability Highway Bridge Deck Using SUQCEM
- Expanding the Range of Applications of a Seismic Retrofitting Method Using Ceramic-Cap-Bars
- Shear Capacity of Perfobond Rib Shear Connectors in Composite Girders
- Study of Hybrid Structures Using SUQCEM Ultra High Strength Fiber Reinforced Concrete
- Structural Performance of R/C Beam-Column Joint with Eccentric Beams
- Research on Electric Power Supply Using Building Structures
Materials and Construction Systems
- Development of a Crack Control Method Using Delayed-Setting Mortar
- Development of Ecological Concrete CO2-SUICOM® with CO2 Emissions Reduced to Below Zero
- Development of New Evaluation Method for Improvement of Surface Quality of Concrete Structures
- Demolition Method Using Micro Blasting
- Experimental Investigation for Crack Resistance Deterioration Mechanism of Blast-Furnace Slag Blended Cement Concrete
Building Environment Engineering
- Flow Field Evaluation of Cleanrooms Using Large-Eddy Simulation
- Energy Consumption in Research and Administration Building, Main Complex, Kajima Technical Research Institute
- Microperforated Panel Absorbers and Their Applications
- Workplace Research Promoting the Creation of Knowledge: Example Study of the Main Research Building of Kajima Technical Research Institute
Environmental Engineering
- Development of an Evapotranspiration-Enhanced Roof Garden and Evapotranspiration Characteristics
- Removal of Nitrogen from Wastewater by Using an Anaerobic Ammonium Oxidation Process
Earthquake and Wind Engineering
- Energy Budget Analysis for the Urban Effect on the Initiation of Heavy Rainfall Based on Meso-scale Simulation
- Relative Site Factors of Strong Motion Observation Sites and Estimation of Attenuation Characteristics of Baserock Motions
- Facility Damages, Human Suffering and Effects on Private Businesses Caused by the Great East Japan Earthquake
Reports
Geotechnical and Geological Engineering and Rock Mechanics
- Study on Mechanical Characterisation of Rock Mass by Fracture Behavior in Percussive Drilling
- Example of Reusing Existing Piles in Urban Areas
Materials and Construction Systems
- Development of a Rebar Arrangement Inspection Method Using Image Processing
- Method of Estimating the Mixture Proportions and the Compressive Strength of Concrete
- Study of Indoor Mould Contamination Control Techniques: Overview of Key Technologies
Environmental Engineering
- Development of a Design System to Minimize the Energy Consumption and the Construction Cost of HAZARD BUSTER®, an Inactivation Device for Pathogenic Microorganisms in Pharmaceutical Industry Effluent