Vol.54 (2006) | Technical Info. | KAJIMA Technical Research Institute

* Original reports are written in Japanese.
For further information, Please send us an Inquiry Form specifying the article name.

Theses

Effect of Input Wave on Subgrade Reaction of Pile in Liquefied Soil
Nonlinear Characteristics of Horizontal Subgrade Reaction of Pile in Liquefied Soil Based on Shaking Table Test
Surface Soil Stabilization by Lattice-Frame-Reinforced Sheet for Very Soft Ground
Development of Construction Methods for High-Density Bentonite Barriers Using Premixed Spraying (Part 1)
-Laboratory Tests on Methods of Spraying Roughly Crushed Bentonite and Investigation of Mixing Methods-
Development of a Measuring System to Verify Performance Assessment for a High-Level Radioactive Waste Repository
-In Situ Borehole Test to Verify Performance Using Manufactured Prototype-
Fundamental Study on an Evaluation Method for the Geological Environment with Spatially Heterogeneous Characteristics
Experimental Study on Change in Equilibrium Earth Pressure Caused by Overburden Pressure Reduction

Study on Structural Performance of Ultra High Strength Fiber Reinforced Concrete
High-Precision Decomposition of Incident and Reflected Waves on Two-Dimensional Irregular Wave Measurement
Bending Shear Behavior of Shear-Yield-Precedence Short-Span Beams
A Discrete Mechanical Model Composed of Springs and Rigid Elements of Laminated Rubber Bearings
Shaking Table Tests on Ultimate Behavior of Slender Base-Isolated Buildings Supported by Laminated Rubber Bearings
Nonlinear Finite-Element Analysis of Reinforced-Concrete Structures under Cyclic Loading

Measurement of Concrete Strength Using the Emission Intensity Ratio between Ca (II) 396.8 nm and Ca (I) 422.6 nm in an Nd:YAG-Laser-Induced Plasma
Experiments on the Producibility of Ultra High Strength Fiber Reinforced Concrete
Retrofit Application to Irrigation Canals of a Directly Sprayed Engineered Cementitious Composite
Durability of Ultra High Strength Fiber Reinforced Concrete
New Methods of Repairing Jetty Structures Using High-Durability Carbon-Fiber-Reinforced Concrete
Development of High-Density Bentonite Barriers by Means of Spraying Methods (Part 2)
-Investigation of Field Conditions-
Characteristics of and Design Method for New Cracking-Inducing Contraction Joints for Structural Walls
Prediction of Steel Corrosion Rate in Concrete Using Monitoring Data

Study on Reduction of Building Services Running Costs: Energy and Maintenance
A Study on Hydrogen Storage and Supply Using an Organic Hydride
Estimation of Ground Response Reduction Characteristics of Soilbags on the Ground by Means of Vibration Tests Using an Exciter
Design Method for Environmental Controls in Large-Scale Greenhouses
3D Sound Reproduction Using OPSODIS

In Situ CVOC Remediation Method Involving Injection of Anaerobic-Biodegradation-Facilitating Compounds
Development of Runoff Simulation System in Mountainous Areas

High-Efficiency Methane Fermentation Using a Mixture of Garbage and Other Waste Biomass
Development of a Two-Stage Hydrogen-Methane Fermentation Process Using Organic Waste
Development of Quick-Hardening Repair Mortar Using By-Products

Large Eddy Simulation of Turbulent Flows around Cylinder-type Structures in Overset Grids
Transfer Function of the Strong Ground Motions Inferred from the Coherent Components in Vertical Array Observation Records
Relationship between Scale Parameter and Gust Factors for Assessment Criterion of Wind Environment
Gust Factor and Assessment Criterion for Wind Environment According to the Wind Engineering Institute

Development of a Structural Health Monitoring System Using a Novel Optical Fiber Sensor
Indoor Navigation and Workpiece Outline Recognition for Autonomous Construction Machinery

Method of Evaluating Performance of Placing Concrete to Eliminate Initial Defects