Geotechnical and Geological Engineering and Rock mechanics

• Jet and Mix for Partial Solidification (JAMPS) as a Soil Improvement Method (Part I)
  - Results of the Field Experiment -
• Jet and Mix for Partial Solidification (JAMPS) as a Soil Improvement Method (Part II)
  - Centrifuge Model Tests & Dynamic Analyses -
• An Experimental Study of Earth Pressure on Very Closely Constructed Parallel Tunnels
• Measurement of Long-Term Settlement of Highly Organic Soil Improved by Preloading
• Prediction System for Geological Conditions Ahead of the Tunnel Face

Materials and Construction Systems

• Application of Self Compacting Concrete to Service Outlet of Dam
• Steel Beams to Reinforced Concrete Column Joints Using Steel Plate Connections (Part 1)
  - Pull-Out Test of Plate Connection -
• Seismic Retrofitting Method for RC Columns Using Continuous Fiber Sheets

Earthquake and Wind Engineering

• Development of Earthquake Damage Estimation System for City Gas Supply System
• A Simple Method of Estimating the Acceleration Response Spectral Ratio between Basement and Surface Ground
• Regional Earthquake Damage Estimation System Using GIS
• Distribution Characteristics of Mean Wind Speed and Direction Averaged by Scalar and Vector Algorithm
• Wind Effects on Snow Accumulation on Two-Level Flat Roofs
  - In Case of Upwind Facing Lower Level Roof -
• Reduction of Wind-Induced Response of Rectangular Plan Buildings with Corner Cutting
• Wave Response Analysis for Large-Pier Structures
• Field Observations on Flow and Density Structure in the Kanazawa-Hakkei Area

Structural Engineerring and Aseismic Technology

• Development of RC High Piers Using High-Strength Reinforcing Bars
• Experimental Study on the Shear Strength of Shear Connectors Using Perforated Plates
• Structural Behavior of H-Shaped Core Wall Subjected to Bending and Torsion
• Experimental Study on Details of H-Shaped Beam-to-Box Column Connections
• Connection between Steel Beam and Concrete-Filled Circular Tubular Steel Columns with High-Strength Material
• Connection between High-Strength Concrete-Filled Square Tubular Steel Columns and Steel Beams Reinforced with Internal Diaphragm
  - Elasto-Plastic Behavior of the Connection and Subassemblage Frame -
• Performance of Grout-Filled Splice Sleeve for High-Grade Rebar SD490 Effect of Structural Factors on Splice Performance
• Discussion of Basemat Flexibility of a BWR-Type Nuclear Reactor Building
• Evaluation of the Influence of Multi-Support Excitation
  for the Response of a Cable-Stayed Bridge
• Study on Punching Shear Behavior of a Flat Slab Connected to a Shear Wall
• Influence of Frequency Characteristics of Controlling Actuator
  on Elasto-Plastic Response Control Using Fuzzy Set Theory
• Effects of Center Hole Size and Insert Plate Thickness on Mechanical Properties of Laminated Rubber Bearing
• Damping Characteristics of RC Shear Wall in the Weak Plastic Range
• Dynamic Loading Test of Shear Panel Using Low-Yield-Strength Steel
• Experimental Study on Shear Wall Made of Sprayed Mortar
• Shear Wall Assembled by Separated Precast Concrete Panels

Building Environment Engineering

• Propagation Characteristics of Structure-Borne Sound Caused by Train (Part 3)
  - Cut-off Characteristics of Structure-Borne Sound of Floating Railway Track -
• Lifetime Estimation for Building Equipment (Part 1)
  - Intermittent-Driven Fan Belt -
• Evaluation Method for Impression of Visual Spaces with Different Simulation-Tools
• Diagnostic Systems for Ventilation in Tunnels

Urban Planning and Disaster Prevention Engineering

• Comparison of Environmental Impact Assessment Systems in the U.S.A., E.U., and Japan
• Numerical Simulation of Outside Environment over a Large Area

Environment Conservation

• A Designing Method for In-situ Bioremediation of Groundwater
  with Advection-Dispersion Analysis
• Development of Soil Environment Control System for Maintaining Sports Turf
• Development of Environmentally Friendly Technology for the Production of Hydrogen (Part 2)
  - A New Theoretical Approach for Photosynthetic Production of Hydrogen -
• Shochu Wastewater Treatment Using Thermophilic Methane Fermentation
  - Field Demonstration Test of Shochu Wastewater Treatment by Thermophilic Methane Fermentation -

Geotechnical and Geological Engineering and Rock mechanics

• Behavior of Soft Ground after Excavation Using the EPS Method
• Performance of Reinforced Basket for Geotechnical Centrifuge
• Behavior of Earth Retaining Structures and Simulation Analysis of Excavation in Soft Ground

Materials and Construction Systems

• Application of Self-Compacting Concrete
• Development of Underwater Cutting Methods for
  Steel Materials Using Abrasive-jets
• ALC Curtain Wall Finished with Ceramic Plates
• Dismantling Test of Reinforced Concrete Thick Wall with Wire Sawing Method and Controlled Blasting Method

Wind Engineering

• Full-Scale Measurements on Wind-Induced Response Characteristics
  of a Semi-Rigid Hanging Roof

Building Environment Engineering

• Propagation Characteristics of Structure-Borne Sound Caused by Trains (Part 4)
  - Measurement Results of Structure-Borne Sound at JR Kyushu Kokura Station -
• Thermal and Humidity Control of the Nagano Olympic Ice Speed Rink

Mechatronics Engineering

• Automatic Recognition System for Workers around