Geotechnical and Geological Engineering and Rock mechanics

• Earth Pressure of the Octopus Shield Tunneling Method
• An Integrated Assessment System for Solute Transport Properties in Coastal Sedimentary Rock
• Evaluation of a Supporting Mechanism for Forepiling
• Control of Concrete Removing Depth Using a Collision Water Jet
• Development of a Friction and Lateral Stress Measurement Cone

Structural Engineerring and Aseismic Technology

• Full Scale Tests of a New Composite Segment (DRC Segment) for Shield Tunnels
• Evaluation of Dynamic Response Analysis of Cable-stayed Bridges Based on Earthquake Observation in Tokachi Bridge
• Shear Capacity of Concrete Joints Processed by the Water Jet Method
• Study on Seismic Performance of the Shikari Ohashi Bridge based on Vibration Tests and Dynamic Response Analyses Using Earthquake Observation Records
• Load Carrying Behavior at the Anchorage Zone of Prestressed Concrete Using High Performance Lightweight Concrete
• Development of an Added Shear Wall without a Post-Installed Anchor
• Restoring the Force Characteristics of Reinforced Concrete Broad Columns
• Seismic Capacity of Unembedded Types of SRC Column Bases
• Bending Shear Test on High-Strength RC Column Using 100 N/mm² Strength Concrete
• Shear and Flexural Performance of Reinforced Beams Using High Performance Fiber-Reinforced Cement Composite
• Dynamic Loading Test for Typhoon Resistance of an Isolator at a Base-Isolated Tall Building
• A Study on Countermeasures against Wind-Induced Cable Vibrations in Cable-Stayed Bridge by Changing Vibration Modes
• Self-Regulating, Semi-Active Oil Damper to Maximize Energy Dissipation Capacity

Materials and Construction Systems

• Assessment System for the Deterioration of Concrete Structures Using the Mix Proportion and Regional Meteorological Data
• Evaluation of Thermal Stresses of Asphalt Mixtures (Part 2)
• Preventing exfoliation by using organic short-fiber reinforced concrete
• Pore Structures in Concrete by Penetration Tests Using Macromolecule Solutions
• Experiment on the Application Method of Mixed Silane and Siloxane Water Repellent Agent
• Development of Super Light-Weight Concrete for Structures (Part 3) Compositional Effect between Super Lightweight Concrete and Steel Beams
• Economic Assessments of the Precast Concrete Construction Method and Traditional Method
• Chemical Transformation of Aggregates to Prevent Alkali-Silica Reactions

Building Environment Engineering

• Field Study and Countermeasures on Floor Impact Noise from Bathrooms
• Effect of an Interior-Panel on Structure-Borne Sound Radiation
• Museum Environmental Engineering
• Development of an Ultra Clean Room for Air-Quality Testing
• Optimal Source Distribution for Binaural Synthesis over Loudspeakers
• BIPV Products in Japan

Environmental Engineering

• Enhancement Remediation Method for Volatile Organic Compounds in an Unsaturated Zone
• A Remediation Method for Contaminated Soil and Groundwater Using a Water-jet
• A Designing Method for In-situ Bioremediation of TCE Contaminated Groundwater with Cometabolic Degradation
• Feasibility of Live Seaweed on an Asphalt Mat
• Development of Ecological Porous Concrete
• Numerical Simulation Scheme for the Atmospheric Boundary Layer by a Nonhydrostatic Model
• LNAPL Migration in Hetrogeneous and Unsaturated Layered Soils
• Performance of Concrete with an Electromagnetic Shield (Part1)

Sustainable Construction Systems

• Integration of Building and Urban Systems Promoting Waste Management Part 1

Earthquake and Wind Engineering

• Models of Boundary at Ground Surface and Cloud to Estimate the Planetary Boundary Layer
• Effect of Micro-Topography on Design Wind Velocity
• Model Test on Pressure Variation Acting on Tunnel Reinforcement Structure Caused by Trains Entering a Tunnel
• Pile Response Characteristics of Liquefied Soil Layers in Shaking Table Tests of a Large-Scale Laminar Shear Box
• Dynamic Behavior during Earthquake of an Abutment with Light-Weight Soil for Backfill
• Effect of Seismometer Foundation on Strong Motion Records
• Wind Resistant Design of a Semi-Rigid Hanging Roof Structure Composed of Glulams and Steel Plate

Mechatronics Engineering

• Simulation of Magnetic-Shield Characteristics of a Room with Highly-Permeable Films (Part1)
• Theory of Attenuator for High Voltage in a Large Crane Near a Broadcasting Antenna

Urban Planning and Disaster Prevention Engineering

• PV Modules for Building's Exterior Walls that have improved Fire-proof and Fire-resistant properties
• Heat Flux to a Surface Wall above the Fire Floor Level

Materials and Construction Systems

• Application of High Performance Lightweight Aggregate Concrete for Construction of Pre-Stressed Concrete Box Girder Bridge

Building Environment Engineering

• Countermeasure to the Chemical Pollutants from Housing Interior Building Materials

Earthguake and Wind Engineering

• 3D Sensor and Graphic Display System for Remote Control Construction
• Correlation between Damage States and Building Attributes at the 2000 Tottori-ken Seibu Earthquake