Geotechnical and Geological Engineering and Rock mechanics

• Development of Horizontally Skirted Foundation
  -Basic Concept for Utilization of Artificially Induced Suction and Its Applicability-
• Evaluation of Seismic Performance of Tunnels
• New Grouting Method with Dynamic Pressure
  -DynaPress Grouting Method-
• Partial Solidification Method of the Arch Formation Effect
• Application of the MBC Analysis Model for Jointed Rock Masses
• Rotational Properties of Semi-Rigid Connection of a Pile Head
• Strength Properties of Fiber-Reinforced Soil Cement Column Using PVA Short Fiber

Structural Engineerring and Aseismic Technology

• System Identification of a Partly Embedded Reactor Building Under Fixed-Based Condition
• A Real-scale Model Test on Constructability of Railway Bridges with Composite Girders Converted from Temporary Girders
• Mechanical Anchorage Using an Anchor Plate For Beam/Column Joints of R/C Frames
  Part 2: Mechanical Anchorage Method Using Frictional Connection
• Development of a Damper with Polyvinyl Alcohol-Engineered Cementitious Composites
• Seismic Performance of RC Frame Structure Using Ultra High Strength Concrete
• Analytical Study on the Deformation Capacity of Steel Plate under Ductile Fracture
• Experimental Study on 'Non-Anchor' Reinforced Concrete Shear Wall for Seismic Retrofit

Materials and Construction Systems

• Volume Measurement System of Earth-and-Sand Loaded on a Dump Truck
• Development of Ultra High Strength Concrete to Controlling Autogenous Shrinkage
• Development and Construction of a New Type of Seawall
• Kajima Water-proof System for Reinforced Concrete Slab in Road Bridges
• Sacrificial Anode Materials for the Purpose of Preventing Macro-Cell Corrosion
• Prediction of Degradation for RC Structures in Marine Environment
• Precast Concrete Construction Costs
  -Analysis on Cost of Manufacturing Precast Concrete Components-
• Investigation for installing Kajima No-Anchor Wall in Seismic Strengthening Construction

Building Environment Engineering

• Building Thermal Insulation and Preventing Dew Condensation in Buildings Part 2
• Museum Environmental Engineering Part 2
• Effect of Acoustical Damping with an Absorptive Layer in the Cavity to Reduce the Structure-borne Sound Radiation
• Estimation Method of Direct and Diffuse Solar Irradiance from Measured Global Horizontal Solar Irradiance based on Long-term Observation Data
• Development of Super-Sensitivity Detector Tube for Very Small Quantity of Ammonia and Its Application to Clean Room and Museum

Environmental Engineering

• Air Sparging with Horizontal Wells
• Evaluation and Monitoring of the Remediation Effect of the Pump-and-Treat Method in DNAPL Contaminated Sites
• Environmental Assessment System for Green Spaces

Sustainable Construction Systems

• Integration of Building and Urban Systems Promoting Waste Management
  Part 2: Analysis of Public Consciousness to Promote Household and Regional Waste Management
• Integration of Building and Urban Systems Promoting Waste Management
  Part 3: Analysis of Specific Environmental Load of Waste Disposal

Earthquake and Wind Engineering

• Gust Factor for Assessment Criteria of Wind Environment
• System Identification of a Building Alone with the Effect of Dynamic Soil-structure Interaction Eliminated
• Dynamic Characteristic Estimation of Buildings During Microtremors Considering Rocking Motion of the Base
• Site Amplification Factors of K-NET Sites in Pacific Coast Region of Southern Tohoku District, Japan
• Study on Strong Wind Hazard Analysis For Buildings

Mechatronics Engineering

• Development of a Network with High Real-time Performance and Its Application to Robot Control
• Theoretical Analysis of Radio Wave Leakage from Gaps between Shielding-concrete Panels

Urban Planning and Disaster Prevention Engineering

• Reduction of Incident Radiation and Heat Release Rate in a Tunnel with Water Screen
• A Study on Decision-Making Process to Earthquake Disaster Prevention Investment Based on Risk Assessment

Materials and Construction Systems

• Outline and Application of Building Erection Planning System

Building Environment Engineering

• Mutual Agreement Formation of Building Renovation Plans by Function Evaluation
  -Renovation Menu Presentation System-