Geotechnical and Geological Engineering and Rock mechanics

• Development of a Partial Solidification Ground Improvement Method Using the Arching Effect
• Groundwater Flow Monitoring Technique Using the BarCad System
• Application of Three-Dimensional Seismic Cross-Hole Tomography in Soft Rock
• Mechanism of Subgrade Reaction of Model Pile Group in Laterally Spreading Soil
• Effect of Soil Density on Subgrade Reaction of a Pile in Liquefied Soil

Structural Engineerring and Aseismic Technology

• New Measurement System for Floating-Body Motions
• Structural Behavior of Retrofit Walls Utilizing Adhered Aggregates for Shear Connection
• Effect of Strain Rate on the Mechanical Properties of Reinforced Concrete Columns (Part 2)
• Experimental Study on Composite Floor Slabs with Beams
• Shear Reinforcement Mechanically Anchored with Steel Plate Heads
• Development of Precast Slabs with Long-Bolt Joints (Part 2)
  -Verification of Fatigue Durability by Wheel Running Tests-
• A Study of an Evaluation Method for Butt Joint Structures Using Precast Concrete Blocks

Materials and Construction Systems

• Some Properties of Anti-Washout Underwater Concrete for Deep Sea in the 1,000-m Class
• Development of Low-Ammonia-Emission Concrete and Evaluation Techniques
• Development of Composite Panels Using Transparent FRP
• Application of Lightweight Aggregate Concrete with a Special Viscosity Agent (Soft-Crete)
• Evaluation of Placing Performance of Concrete to Prevent Initial Defects
• Crack-Reducing Concrete to Reduce Drying-Shrinkage Cracking
• Evaluation of Concrete Health Using Ultrasonic Waves

Building Environment Engineering

• Research on the Systematization of Summer Dew Condensation Prevention Technology
  -Part 1: Classified Patterns of Summer Dew Condensation and a Weather Data Selection Method-
• Reduction of Vibration for Ground Response Using a Soil-Bag Method
• Development of Thermal Storage Systems Utilizing Building Mass

Environmental Engineering

• Effects of the Addition of Mycorrhizal Material to Roofgarden Soil
• Laboratory Studies on the Effect of Light Limitation by Turbid Water on the Growth of Attached Algae
• Numerical Simulation of an Assessment of the Environmental Impact on a River Ecosystem of Sediment Flushing from a Dam
• An Innovative In-Situ VOC Remediation Technology Using Iron Powder: Jet Blending Method

Sustainable Construction Systems

• Study of Resource Sustainability Assessment for Buildings
• Characteristics of High-Performance Concrete Using Coal Ash Artificial Aggregate
• Environmental Assessment Methodology for Demolition Waste Treatment Processes

Earthquake and Wind Engineering

• Building Risk Management for Earthquakes and Fires

Mechatronics Engineering

• Analysis of Propagation of Superlow-Frequency-Band Electromagnetic Waves
• A Network-Based Bilateral Control with Prioritized Control-Related Data Transfer
• Deformation Monitoring of Slopes by Vision Metrology

Urban Planning and Disaster Prevention Engineering

• Development of a System for Prediction and Evaluation of Heat and Wind Environment in Urban Areas and Blocks
• Pavements to Absorb Electric Waves for ETC Tollgates

Geotechnical and Geological Engineering and Rock Mechanics

• Development of a Cutoff Material Using a PVA Polymer

Materials and Construction Systems

• Results of Construction Using Ultra-High-Strength Concrete with Low-Autogenous-Shrinkage
  -Application to the Akihabara Pedestrian Bridge-
• Investigation for Overlay Reinforcement Method on Steel Deck Utilizing Engineered Cementitious Composites
• High-Durability Concrete with ｦﾃ2CaO｡ｦSiO₂ and Chopped Carbon Fiber Cured in CO₂ Gas

Building Environment Engineering

• Subjects and Results of Studies over the Past 35 Years on the Characteristics of Heat, Moisture, and Air Quality
• Museum Engineering Technology New Indoor Environment Control Technology to Support Display and Storage Spaces